|
|
|
| New Products Preview > Testing &
Measurement Instrument |
 |
|
|
|
Testing & Measurement Instrument |
Exhibitor:Agilent Technologies
Booth No.：3B41
New products：InfiniiVision 7000 series
Oscilloscope --- Extensive and profound
1. The industry's 12.1 inches XGA LCD
display oscilloscope
2. The industry's ultra-fast MSO waveform
capture rate with 100,000 waveforms per
second
3. The industry adopt a small number of
hardware to achieve decoding the serial bus
oscilloscope |
 |
Exhibitor: Minipa Electronics
(Shanghai) Co., Ltd.
Booth No.: 3BG1
New products:
MINIPA ET-3731 1000A TRMS Clamp-meter：The
jaw opening is 51mm; the starting current
test, jaws frequency test, and safety level
reach the CE CAT IV600V. The unique inrush
current test function can be used to measure
the starting current of motor. There will be
a larger current during starting of the
motor, and the duration is very short.
During the ACA test, press the "INRUSH" to
enable the instrument into the testing mode,
and "-----" shall be displayed on the LCD
until the motor started. The internal
integration time during test is 100 ms, this
test will be conducted for one time and the
output reading will be preserved. |
 |
Exhibitor:RIGOL TECHNOLOGIES, INC
Booth No.：3CG1
New products ：RIGOL DS1000B Series Digital
Oscilloscope
1. DS1000B is the first national digital
oscilloscope with 2GSa/s real-time sample
rate, 50GSa/s equivalent sample rate,
2. 5.7’ 64K TFT color LCD, bright and vivid
waveform display
3. DS1000B with the C standard of LXI can
recreate and recon figurate quickly and
efficiently the economy
4. Adjustable trigger sensitivity: Filters
noise from the trigger signal to avoid false
triggers
5. Using of latest ASIC technology,
tailoring for the oscilloscope design,
costuming front-end analog integrated
circuits, DS1000B can replace the
traditional relay. And the little peripheral
devices, and high-integration can improve
the reliability and consumption so that it
can extend the service life
5. Standard interface: USB Device, RS-232;
USB Host, to support USB flash memory and
USB printer |
 |
Exhibitor:Extech Electronics Global
Site
Booth No.：3GG1
New products ：Extech 8330 Auto component
analyzer
Extech is proud to announce the addition of
two new High Voltage Withstand Testers to
our product line: models 8330. The 8330
features 20kV output at a maximum of 5mA.THE
models include Smart GFI for operator
safety, and can be upgraded to include
Extech’s patented Ramp-HI and Charge-LO
features. Each tester has 50 built-in memory
locations that can be connected in sequence
with each other. Customers can purchase an
optional GPIB or RS-232 interface for
automated testing applications, or choose a
Printer Card to output test results directly
to a printer. The 7400 series is perfect for
applications including spark plugs,
connectors and aviation components. |
 |
Exhibitor: Xiamen Lilliput
Technology Co., Ltd.
Booth No.: 1F14B
New products:
1. HDS-N Series Handheld Digital
Oscilloscope: The bandwidth is 20～60MHz, the
real-time sampling rate is 100MS/s～250MS/s,
and integrated with functions of
oscilloscope and multi-meter;
2. MSO Series digital storage oscilloscope:
It is integrated with functions of digital
oscilloscope and logic analyzer, the
bandwidth is 20～100MHz, the real-time
sampling rate is100MS/s～1GS/s, and it is
with dual-channel ＋ external trigger + 16/32
logical channel, rich trigger functions and
data analysis means, and large color LCD. |
|
Exhibitor:Shenzhen Ji-rong Science
and Technology Co., Ltd.
Booth No.：3KG3
New products：TPK S-8 Electric screwdriver
real-time monitoring notation system
1. With LED display, it can show a variety
of state or parameters (the total number of
jobs to pay, the lock success screws to pay,
the total number failure number of screws to
pay, etc.)
2. It Has set up a variety of functions,
such as the determination of the benchmark
time, the adjustment of bias’ benchmark
time, the settlement of groups of screws and
the password function;
3. With alarm functions, it can alarm using
the sound (buzzer) warning light when lock
screw abnormalities in the process of pay.
4. With a variety of parameters set, storage
capabilities and show features in the
process of lock and pay; it can check the
amount of screw and the number of jobs
everyday. In addition, it can view the
cumulative number.
5. It has the self-test function including
LCD, buttons and so on testing.
6. It has input control interface. Thus,
when input signal pass through the pipeline
automatically, it can ensure the electric
screwdriver to work.( Turning off this
function is available)
7. It has output function. Thus, after the
success of the screw locks outputting a
group of signals, it can ensure assembly
line equipment to work. ( Turning off this
function is available)
8, With the upgrade function, it only can be
used as a single power supply but also
computer network monitoring. Through
computer, it also can connect multiple
electric screwdrivers to unify the Software
(Can also turn off this feature) |
 |
Exhibitor: Uni-Trend Electronics
(Shanghai) Limited
Booth No.: 1D14
New products:
In the past 19 years, we have successfully
introduced to the global market ten
categories of various products, such as the
digital multi-meter, automotive detection
instrumentation, electrical testing
instrument, environmental protection heat
engineering and analysis instruments, safety
measuring instruments, general-purpose test
instrument, measurement and calibration
instrument, digital storage oscilloscopes,
etc., and we continue to make the series of
product diversified, and fully meet the
unique needs of different customers. In
addition, the high-quality Uni-Trend
products have awarded a number of design
awards and the title of "Famous-brand
(Industrial) Products of Guangdong
Province", and acquired the European CE,
American UL and Chinese CMC and other safety
certificates. |
|
Exhibitor：Fluke Corporation
Booth No.: 3JG4
New products:
1. FlukeTi25 and FlukeTi10 Thermal Imager－An
important tool for troubleshooting and
maintenance.
2. Fluke 317/319 Clamp Meter－With ergonomic
design, its streamlined appearance is more
convenient to hold;
3. Fluke 771 CHN high-precision milliampere-type
process current clamp meter－A new generation
of milliampere current meter, which can
measure the current rapidly so as to ensure
the continued process control;
4. Fluke 287/289 TRMS electronic recording
multi-meter－It is an advanced digital
multi-meter for extremely strict
professionals. |
 |
| |
|
|
|
|
|
